How To Check The Stainless Steel Elbow After Installation?

Stainless Steel Weld Elbow is different from carbon steel elbow mainly in material. The chemical composition it contains will keep the surface of the elbow from rusting and corroding for a long time. So do you know how to check the stainless steel elbow after installation?

The inspection method after the stainless steel elbow is installed is as follows:

1. Before installation, the various standards of the stainless steel elbow must be strictly checked to check whether the diameter meets the use requirements. In addition, it is necessary to ensure that there are no problems during transportation and make all preparations before installation.

2. When installing, the connection method of the stainless steel elbow can be directly installed on the pipeline and installed according to the location of use. Generally speaking, the installation can be placed on the pipeline at will, but in order to facilitate later maintenance, it is necessary to pay attention to the medium of the stainless steel elbow should be from the bottom of the longitudinal valve disc, and the stainless steel elbow can only be installed horizontally.

3. When installing the stainless steel elbow, attention should also be paid to the sealing to prevent leakage, thereby affecting the operation.

4. The bolts on the valve packing gland of the stainless steel elbow should be tightened and cannot be pressed into a crooked shape to avoid leakage caused by the movement of the valve stem.