How To Polish Stainless Steel Elbows

Stainless Steel Weld Elbow stored for a long time should be checked regularly. The exposed processing surface should be kept clean and clean, and stored neatly in a ventilated and dry place indoors. Stacking or outdoor storage is strictly prohibited. Always keep the stainless steel elbow dry and ventilated, keep the device clean and tidy, and store it according to the correct storage method. Do you know how to grind stainless steel elbows?

1. When the master asked to grind the elbow, he should use an 80-mesh louver grinding wheel. The black one is easier to use. The apprentice suggested using a red one. It must be slow and not pressed hard. Try to keep the grinder flat when grinding.

2. After all the grindings have been done, start to change to a 320-mesh louver grinding wheel and grind it again. The 320-mesh grinding wheel must be polished very carefully, otherwise it will leave scratches from the 80-mesh grinding wheel.

3. After the 320-mesh louver grinding wheel has been polished, wax the elbow. It is better for novices to wax more.

4. Then continue to polish with the hemp wheel. At this time, press hard and the harder you press, the better.

5. After polishing, remember to wipe the wax clean. It is easier to wipe it with some dust.

Note: Be careful not to rush when polishing, and be careful not to grind the wires