Types Of Pipe Fittings By Purpose

Stainless Steel Flange: A part that connects pipes to each other, mainly used for connecting pipe ends.
Union: Also known as oil joint, it is mainly used for matching hardware accessories and can be installed in various pipe interfaces.
Pipe clamp: A commonly used accessory in industrial pipe connection, used to connect a short section of two pipes. Ferrule: A stainless steel pipe connector, mainly used in mechanical pipe connection systems such as water treatment and municipal water supply systems.
Throat clamp: An ideal connection fastener, suitable for fasteners for connecting soft and hard pipes above 30mm, with beautiful appearance after assembly.
Cold-drawn tee: Its function is to change the direction of the fluid, and it can divide the fluid of the main pipeline into two or three other pipes.
Elbow: A commonly used connecting pipe fitting in plumbing installation, used for connection at the bend of the pipe, and a pipe fitting that changes the direction of the pipeline.
Bend: A set of bending dies are used for bending. Regardless of which machine equipment and pipeline, most of them use bends.
Reducer: Also known as reducer, it is used to connect two different pipe diameters, and is divided into concentric reducer and eccentric reducer.
Reducing elbow: When making a 90-degree turn, the diameter of the pipe changes. There are hot-push elbows, stamped elbows, and welded elbows.
Branch pipe platform: A reinforced pipe fitting used for branch pipe connection, replacing the use of reducing tees, reinforcement plates, reinforced pipe sections and other connection types.
Tee: A tee is a pipe connector, also called a pipe tee or a tee pipe fitting, a tee joint, used at the branch pipe of the main pipe.
Cross: Used to connect four pipes with the same diameter and the same verticality, mainly used for diversion or direction conversion.
Gasket: A material placed between two planes to strengthen the seal, a sealing element set between tight covers to prevent fluid leakage.
Raw tape: An auxiliary product commonly used in plumbing installation, used at the connection of pipe fittings to enhance the airtightness of the pipe connection.
Wire hemp: An auxiliary product commonly used in plumbing installation, used to wrap around the thread of pipe fittings, which can play a sealing role and prevent water leakage.
Blind flange: Also known as blind flange, the real name is blind plate, which is a connection form of flange, in fact, it is a flange without a hole in the middle.
Pipe plug: refers to an external threaded pipe fitting used to plug the internal thread of the end of the pipe, including square pipe plug, hexagonal pipe plug, etc.
Head: It is a component of the container, which refers to the element used to seal the end of the container to isolate the internal and external media, also known as the end cover.
Welding plug: It is used to protect some parts of the welded parts that need to be protected or are easily injured or deformed during welding.
Pipe clamp: A pipe fitting used to fix the pipeline, a commonly used pipe fitting in plumbing installation, used to fix the pipeline.
Valve: A control component in the fluid conveying system, with functions such as cutoff, regulation, diversion, pressure stabilization, diversion or overflow pressure relief.
Compensator: It is composed of the bellows of its working body and accessories such as end pipes, brackets, flanges, and conduits, and is a compensating element.
Decontaminator: Prevent impurities in the pipeline medium from entering the transmission equipment or precision parts, causing production failures or affecting the quality of the product.
Reinforcement pipe: Reinforcement means to increase strength. It is basically a forging pipe to improve the strength of the area by increasing the force-bearing area.
Clasp: It is the main retainer of removable denture restoration, made of metal, and mainly plays the role of retention, stability and support.
Tow hook: It refers to the hook on the tugboat for hooking the towline and facilitating release. It can be divided into spring tow hook, hydraulic tow hook, remote control tow hook, etc.
Lifting ring: It is a kind of industrial lifting device, a device for lifting heavy objects in lifting machinery. Common lifting rings include round lifting rings, pear-shaped rings, etc.
Bracket: The truss supporting the middle roof truss is called a bracket. Generally, a parallel chord truss is used, and its web bar adopts a herringbone system with vertical bars.