What Are The Commonly Used Specifications Of Stainless Steel Elbows?

Stainless Steel Weld Elbow is one of the commonly used components in the pipeline system. Common specifications are as follows:

1. Elbow angle: Common elbow angles are 45 degrees and 90 degrees, indicating that the bending angles are 45 degrees and 90 degrees respectively.

2. Elbow radius: The radius refers to the curved radius of the elbow. Common radii include 1.5 times the pipe diameter, 2 times the pipe diameter, and 3 times the pipe diameter.

3. Pipe wall thickness: The wall thickness of the stainless steel elbow can be selected according to actual needs. Common wall thicknesses include SCH10, SCH40, SCH80, etc.

4. Size range: The size range of stainless steel elbows can be selected according to specific pipeline system requirements. Common size ranges include 1/2 inch to 48 inches, etc.

It should be noted that the above are only common specifications of stainless steel elbows. In actual use, it is necessary to select appropriate specifications according to specific engineering requirements and pipeline system design.