WhatsApp: +86-13868899917

What Should Be Paid Attention To When Storing Stainless Steel Seamless Insulation Elbows

Date: | Read: 23

Stainless steel seamless insulated elbows will not corrode, pit, rust or wear. Stainless steel is still one of the raw materials for metal materials used in construction. Because stainless steel has excellent corrosion resistance, it can keep the structural components intact in engineering design. The raw material for rolling seamless insulated elbow pipe fittings is round tube billets, which are cut by a cutting machine to a length of about one meter and sent to the furnace for heating via a conveyor belt. The billet is sent into the furnace and heated at a temperature of about 1200 degrees Celsius. The temperature control in the furnace is a major issue. After the round tube billet is taken out of the furnace, it is pierced by a pressure piercing machine. The fuel is hydrogen or acetylene. The more common piercing machine is the tapered roller piercing machine. This piercing machine is made with good product quality, large perforation diameter expansion, and can pierce a variety of pipe fittings. After piercing, the round tube billet is successively rolled by three rollers, continuous rolling or extrusion. After extrusion, the tube should be removed and sized. The sizing machine rotates through the conical drill bit to drill holes in the steel blank to make pipe fittings.

The storage of Stainless Steel Weld Elbow should pay attention to the following points:

1. The site or warehouse for storing steel should be selected in a clean and well-drained place, away from factories and mines that produce bad gases or dust. Weeds and debris should be removed on the site to keep the steel clean.

2. In the warehouse, it should not be stacked together with materials that are corrosive to steel, such as acid, alkali, salt, cement, etc. Different types of steel should be stacked separately to prevent confusion and contact corrosion.

3. Large-scale steel, rails, steel plates, large-diameter steel pipes, forgings, etc. can be stacked in the open air.

4. Small and medium-sized steel, wire rods, steel bars, medium-diameter steel pipes, steel wires and wire ropes, etc. can be stored in well-ventilated material sheds, but with thatches on top and pads on the bottom.

5. Some small steel products, thin steel plates, steel strips, silicon steel sheets, small-diameter or thin-walled steel pipes, various cold-rolled and cold-drawn steel products, as well as expensive and easily corroded metal products can be stored in the warehouse.

6. The warehouse should be selected according to geographical conditions. Generally, an ordinary closed warehouse is used, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device.

7. The warehouse requires ventilation on sunny days, and closed on rainy days to prevent moisture, and always maintain a suitable storage environment.

Stainless steel seamless elbows are mainly used in pipeline transportation and can be used to transport some fluids, such as some energy, etc. The transportation of oil and gas and some groundwater can all be achieved by seamless insulation elbows. General-purpose seamless insulation elbows are rolled from ordinary carbon structural steel, low-alloy structural steel or alloy structural steel, with a large output, and are mainly used as pipelines or structural parts for conveying fluids. Seamless insulation elbows made of such steel are widely used in hydraulic props, high-pressure gas cylinders, high-pressure boilers, fertilizer equipment, petroleum cracking, automobile half-axle sleeves, diesel engines, etc. According to the different chemical composition (mainly carbon content), heat treatment process and purpose. When it comes to further use and promotion, when talking about seamless thermal insulation elbows, we will think of the excellent quality of this pipe material, which is a major feature of seamless thermal insulation elbows. Secondly, seamless thermal insulation elbows use a steel structure, so the hardness of seamless thermal insulation elbows is very high, which is why it can be widely used.

What Should Be Paid Attention To When Storing Stainless Steel Seamless Insulation Elbows

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.